Gold gooseneck Touchless Faucet KEG-QT-6151AD

The gold gooseneck touchless faucet KEG-QT-6151AD uses active infrared sensor technology that allows you to start the flow of water without touching the faucet. With brass material and gold plated surface, it can be well suited for other bathroom products. Water will security stops after 1 minute.

  • Brand: KEGE
  • Item No: KEG-QT-6151AD
  • Easy installation and cleaning
  • Hygienic, bacteria and germs free without touching
  • Material: Brass

Features:

  • Touchless wave-on sensor: wave the sensor without touch, water flows, wave again, water stops. Water stops automatically after 1min continuously flow.
  • Adjustable sensor range by a remote controller (optional).
  • Low power indication: This may indicate it is time to replace existing batteries with new ones or there is not enough power going to the unit.
  • Water-saving: Water-efficient faucet reduces overall water usage without sacrificing water.
  • Energy-saving: 4AA alkaline batteries shall last approximately 3000 times/month for one year.
  • Easy installation and cleaning.
  • Outside connected battery box for a convenient changing between AC,DC and AD.
  • Healthy and Safe: with the touch-free faucet, it can prevent the spread of bacteria and germs. It’s not only time-saving but also hygienic.
  • Sensor lifespan:500,000 times on and off. Valve lifespan:1,000,000 times opening.

Active infrared sensor

Active infrared touchless sensors use the emission and reception of infrared beams to detect the presence and/or movement of objects or people in their field of detection. The technology is ideal for applications requiring a long and narrow detection range.

infrared touchless sensor icon for touchless faucet

General Information

Model No. Type               Material Mixer N.W / G.W Warranty
KEG-QT-6188AD Deck-Mounted Sensor  Faucet           

Brass with chroming

No / for cold water only 1.6/1.9KG One Year

Packing Information

Inner package Outer package Quantity per carton
378*165*112mm 520*390*475mm 12pcs

Technical Specification

Working power Maximum washing period Working water pressure Sensor distance
DC6V & AC220V 1min (Default) 0.05-0.7MPa 20±3cm to white board (about 13cm to
hand)

How to install touchless bathroom faucets?

How to install touchless bathroom faucet pictureA

Step 1

Take out the faucet body from the package and remove the rubber gasket, S/S gasket as well as fixing net. See Picture A.

How to install touchless bathroom faucet pictureB

Step 2

Drill two holes with size 7.5mm diameter and 30mm depth. Knock the expansion tubes into the holes and fix the control box holder to the wall. See picture B.

How to install touchless bathroom faucet picture

Step 3

Connect the faucet water hose with the control box outlet (See picture C-1). Then fix the water hose to the control box inlet and triangular valve (See picture C-2 and C-3). Fix the control box to the holder and connect the sensor wire.

How to install touchless bathroom faucet picture

Step 4

Take out of the battery box from the control box and install 4 pieces of AA alkaline batteries correctly. Then insert back the battery box to the control box. Insert the transformer plug to the socket if needed(See picture C-6).

Motion sensor faucet troubleshooting

Problem Possible Reason Suggested Solution
No water flow Batteries run out Replace batteries
Dirt on sensor surface Clean the sensor surface
Main water supply is shut off Turn main water supply on
Dirt on water filter net Clean the water filter net
Water pressure is not applicable Refer to technical specification
Have a continuous water flow problem Batteries run out Replace batteries
Low water pressure Refer to technical specification
Having leakage after turning off the faucet Low water pressure Refer to technical specification
Dirt on water filter net Clean the water filter net

People who are asking more:

A touchless faucet uses active infrared sensor technology that allows you to start the flow of water without touching the faucet. Instead, just place your hand in front of the sensor will start the water flow, and the water will stop when you take your hand away.
If you forget to close the no-touch faucet, no problem, the sensor IC and program will control the water to stop automatically after 3mins continuously flow, time can be set.
More excitingly, the design of most touchless faucets is stylish and elegant to fit all basins,sink or lavatory, from classic to modern.

Yes, the touchless faucet is quite reliable. The technology of the infrared sensor is stable and developed for many years. Every KEGE touchless faucets are tested by life testing, valve on/off testing, infrared sensor distance testing and salt spraying testing. Sensor lifespan:500,000 times on and off, valve lifespan:1,000,000 times opening.

In the future modern smart homes, a touchless bathroom faucet is also one core part. They’re cool, for one thing, as their motion sensors always give you some sort of smart, modern techy feelings. Plus, a touch-free faucet keeps your fixture and bathroom clean, it’s a good hygienic choice and decreases the risk of contracting viruses and diseases.

Touchless faucets use infrared sensor technology that allows you to start the flow of water without touching the faucet. Instead, just placing your hand under the spout sensor, the sensor will give the solenoid valve a signal to open, then the water will start flow; When you take your hand away, the sensor will indicate the solenoid valve to close, then water flow will stop. For more details, please check here.

The touchless faucet needs electricity for sure. Both the sensor and solenoid valve works need electricity power. Normally three choices: DC 6V: 4xAA alkaline batteries; AC: using a transformer to transfer power from 220V/380V to 6V; Both DC/AC models existed, firstly use AC power to work, if AC no power then DC start to work.

6V with 4xAA alkaline batteries shall last approximately 3000 times/month for one year.

1. Battery issue: battery no power or battery installed in the wrong direction.
2. Sensor issue: the sensor got damaged, the surface was not clean, or the waterproof cable connection issue.
3. Solenoid valve issue: the filter in the valve is blocked or the valve is damaged.

For more details, please check troubleshooting.


Related products: