The waterfall sensor faucet is also called waterfall touchless faucet, waterfall automatic faucet, and waterfall sensor tap. It uses active infrared sensor technology that allows you to start the flow of water without touching the faucet.
It has 3 different height gooseneck faucets which can suit different basins. The sensor on the spout can auto-calibrate the sensor distance according to the working conditions and environment. Actually, it is a totally smart waterfall sensor faucet.
Brand: KEGE
Item No: KEG-11-B107AD,KEG-11-B108AD,KEG-11B109AD
Easy installation and cleaning
Hygienic, bacteria and germs free without touching
Made of brass raw material with chrome surface
MOQ: 1pcs
Warranty: one year.
Sensor Distance: Auto Calibrated
Cheap price: $40-$70 based on the requirement and quantity
The waterfall sensor faucet comes in three different heights: 17cm,23cm and 33cm. It is a totally smart basin faucet that can work in all different situations.
How does the waterfall sensor faucet work?
The waterfall sensor faucet has the sensor eye on the spout. When you use it for the first time or when the power reconnects, the sensor eye automatically adjusts the sensor distance according to working conditions and the environment.
When you put your hands near the faucet and in the sensor detection range, the water starts flowing automatically. When your hands leave, the water stops. Or waiting after the setting minutes, normally 60 seconds and the water stops.
The working principle is easy and it is so easy and convenient to use the gooseneck sensor faucet, for more details, you can check our blog here.
The touchless faucet is the same structure as the others. It has a faucet body with sensor eyes. And a control box with a battery holder and solenoid valve inside.
You can choose a different power supply with either DC 6V or AC 110-240V.
DC 4.5-6.4V with 4 AA alkaline batteries/ AC110-240V adapter– Output: 5.0-6.5V/1A (Ripple<60mW)
Brass
G1/2″
No/for cold water only, but can install a mixer valve
≦ 40 uA
1.Adjustable range 7-21CM 2. . Default distance when power connected 9±10%CM Sensor distance will automatically be adjusted in 30s.
0.512s
60s±6s
0 ~ 50 ℃
-40 ~ 80 ℃
Open≤1s, close≤1.5s
0.05MPa-0.6MPa
Package
Net weight
Gross Weight
Inner package
Outer package
Quantity per carton
2.3KG
2.8KG
380*170*113mm
525*395*360mm
9pcs
Automatic on/off
The infrared sensor faucet automatically turns on and off (Convenience & Hygiene).
Time Limit: Washing time is set for 60 seconds.
Low Power Indication
This may indicate it is time to replace existing batteries with new ones or there is not enough power going to the unit.
Sensor Distance Automatically Adjusted
Sensor distance is automatically adjusted according to working conditions and environment.
Battery and Main Power Supply
Power supply: DC6V/AC110-240V
The valve will automatically stop water from flowing if no power is supplied.
Battery replacement
Please replace the battery when the indicator light continuously and slowly double flashes:
Remove the battery case cover
Replace with 4 AA alkaline batteries.
How to install waterfall sensor faucet?
Fix the faucet body to the basin with nuts and gaskets。
Drill two holes in the wall and fix the control box under the basin.
Connect the faucet water hose to the control box.
Connect sensor wire.
Plug adapter to the main power supply.
Motion sensor faucet troubleshooting
Problem
Possible Reason
Suggested Solution
No water flow
Batteries run out
Replace batteries
Dirt on sensor surface
Clean the sensor surface
Main water supply is shut off
Turn main water supply on
Dirt on water filter net
Clean the water filter net
Water pressure is not applicable
Refer to technical specification
Have a continuous water flow problem
Batteries run out
Replace batteries
Low water pressure
Refer to technical specification
Having leakage after turning off the faucet
Low water pressure
Refer to technical specification
Dirt on water filter net
Clean the water filter net
People who are asking more:
A touchless faucet uses active infrared sensor technology that allows you to start the flow of water without touching the faucet. Instead, just place your hand in front of the sensor will start the water flow, and the water will stop when you take your hand away. If you forget to close the no-touch faucet, no problem, the sensor IC and program will control the water to stop automatically after 3mins continuous flow, time can be set. More excitingly, the design of most touchless faucets is stylish and elegant to fit all basins, sinks, or lavatories, from classic to modern.
In the future modern smart homes, a touchless bathroom faucet is also one core part. They’re cool, for one thing, as their motion sensors always give you some sort of smart, modern techy feelings. Plus, a touch-free faucet keeps your fixture and bathroom clean, it’s a good hygienic choice and decreases the risk of contracting viruses and diseases.
Normally the touchless faucet supports both DC with batteries and AC connected to AC power outlet. You can use batteries only for sure.
I don’t believe that there is a way to increase or restrict the water flow. But you can change water pressure by adjust the water in valve.
Touchless faucets use infrared sensor technology that allows you to start the flow of water without touching the faucet. Instead, just placing your hand under the spout sensor, the sensor will give the solenoid valve a signal to open, then the water will start flow; When you take your hand away, the sensor will indicate the solenoid valve to close, then water flow will stop.