Public toilet touchless faucets

Touchless Faucets

Touchless faucets or automatic sensor faucets can be used in the home bathrooms, public toilets, schools, shopping malls, hospitals and so on.

Best Automatic Sensor Faucet Manufacturer and Supplier in China

More than 7 years of manufacturers experience, One stop supplier service for amazon, online sales CUSTOMERS

Ningbo Kege is a manufacturer specializing in research, development, and the production of high-quality automatic sensor faucets, sensor taps in China since 2015.

All KEGE touchless faucets are tested by life testing machines, sensor distance machines, salt and spray test machines, IP test machines, 3D measurement machines before shipment in our factory. So customers are always satisfied with our quality products.

Touchless faucets use active infrared sensor technology that allows you to start the flow of water without touching the faucet. Put your hand in the sensor detects area will activate the water flow, and the water will stop when you take your hand away.  It’s quite hygienic and convenient for your life.

We have sensor faucets for cold water only and also hot and cold water with a temperature mixer for the bathroom.  You can see our faucet list below and choose the colors, shapes of the automatic faucet. We have a deck mounted and wall mounted touchless faucets for installation.

The touchless faucet is widely used in public restrooms, such as schools, hospitals, airports, restaurants, shopping malls, cinemas, and so on. And nowadays it is also well used in kitchen and bathroom also, it is very worthy to install or replace a faucet in your kitchen and bathroom.

Compare with KOHLER, TOTO, DELTA, AMERICAN STANDARD these big brands, KEGE touchless faucets are also with good and stable quality, responsible good after sales service. For the most important electronic parts, KEGE design, produce, test by ourselves. What’s more, KEGE prices are much more competitive than these big brands.


Touch vs touchless faucet

The main difference between a touch vs touchless faucet is already clear from the name. Touch faucets require physical contact with part of your body in order to work. Note that this must be bare skin — you cannot tap the faucet with your sleeved elbow and expect the water to start. A touchless faucet uses a sensor to detect when water is needed and turns the water on and off automatically. No touch is needed, from any part of your body.

However, most people won’t tell you that the root difference between these two faucets is because of their sensor difference. Different sensors lead to different actions and movements. The touch faucet uses the capacity sensor that allows people to touch any part of the faucet to activate the water flow. The touchless faucet uses active infrared sensor that allows the touchless faucet to activate the water flow.

Both touch and touchless faucets can be powered either with a/c connection to the home’s power or with batteries. 

Both touch faucet or touchless faucet has their own advantage or disadvantage. Here we listed are all touchless faucets because they are more healthy and safe.


Automatic faucet price

As a touchless supplier and factory in China and we researched and developed many years in key electrical spare parts. We tried our best to offer all our sensor faucet customers the best prices.

  • MOQ: 1 pcs
  • Target prices: FOB China $45-$80 based on different quantities and requirements.
  • Warranty time: 2 years.

Automatic faucet control

Automatic faucet control means the controller under the faucet or under the basin. Normally it’s a small control box, but it has the key spare parts of the solenoid valve, battery box inside. All these key spare parts in the control box are connected with the waterproof cables.

It also has water in and out marks on the control box, water comes in and passes through the solenoid valve, then out of the control box to the faucet body. The solenoid valve is used to close and open the water.


Touchless faucet sensor

As the most important part, the work of the sensor is to forward the signals to the valve to turn on the faucet after detecting your hand. Its job is to inform the valve when to start or stop the flow based on the presence or absence of your hands. It has either infrared light or ultrasonic sensors. In most cases, infrared light sensors are often placed at the tip of the spout.

The sensor cover is normally made of plastic ABS or EMS material which infrared beams can pass through it. Inside the cover is the PCBA with the circuit that can control the whole program working. Finally, it is sealed with resub potting with a strong moistureproof function.

The sensor range for touchless faucets is between 180mm-380mm. The sensor range and flushing time can be adjusted by a remote controller.

For details, you can check our page on the infrared motion sensors.

Single hole sensor faucet

Single hole sensor faucet means the installation on the basin is a single hole, which means the sensor faucet is single hole mounted. All the touchless faucets listed here are single hole sensor faucets.

It is simple to install single hole sensor faucet. All the flexible hoses and cables are through the single hole to connect with the control box.

Touchless Bathroom Faucet KEG-BY-149AD
+86 158 5847 1917
315th,Tongning road,Hongtang Industrial C area, Jiangbei, Ningbo,China,315033

Touchless faucet for vessel sink

The touchless faucet is suitable for any type of vessel sink. No matter top mount or under-mount sink, single bowl or double bowl basin sinks, we all have suitable touchless faucets.

vessel sink faucet


The touchless faucet needs electricity for sure. Both the sensor and solenoid valve works need electricity power.

DC battery box for touchless faucet

DC battery operated, normally 6V 4xAA alkaline batteries. Batteries shall last approximately 3000 times/month for one year. Battery replacement is easy, just open the battery box cover and put the new alkaline batteries into the box. Notice: please take care of the battery polarity.

power ac adapter

AC adapter, one side with power plug and one side with waterproof connector connect with the sensor or control box. The input can be 110v-380v and output 6V-9V. The ac adapter is not expensive and can buy it separately.

Automatic faucet with temperature control

Some touchless faucets, it has a  handle that can adjust the hot and cold water temperature, the mixing valve is integrated inside the faucet. Some items can even show the temperature on the faucet. We strongly suggest home bathroom use this type of faucet.

adjustable handle for touchless faucets

Some other touchless faucets only allow for cold water. If need cold and hot water, you need to install a separate mixing valve like the one in right.The installation is also easy, one hose with cold water and one hose with hot water, then mix together with cold and hot water.


Touchless faucet and soap dispenser

faucet with soap dispenser

A normal soap dispenser is workable, but we also have touchless soap dispenser which is perfect for the touchless kitchen faucet. Either free-standing or deck-mounted touchless soap dispenser can be working very well. It will make your kitchen totally bacteria and germs free.


Related products:


A touchless faucet uses active infrared sensor technology that allows you to start the flow of water without touching the faucet. Instead, just place your hand in front of the sensor will start the water flow, and the water will stop when you take your hand away.
If you forget to close the no-touch faucet, no problem, the sensor IC and program will control the water to stop automatically after 3mins continuous flow, time can be set.
More excitingly, the design of most touchless faucets is stylish and elegant to fit all basins, sinks, or lavatory, from classic to modern.

Yes, the touchless faucet is quite reliable. The technology of the infrared sensor is stable and developed for many years. Every KEGE touchless faucets are tested by life testing, valve on/off testing, infrared sensor distance testing and salt spraying testing. Sensor lifespan:500,000 times on and off, valve lifespan:1,000,000 times opening.

In the future of modern smart homes, a touchless bathroom faucet is also one core part. They’re cool, for one thing, as their motion sensors always give you some sort of smart, modern techy feelings. Plus, a touch-free faucet keeps your fixture and bathroom clean, it’s a good hygienic choice and decreases the risk of contracting viruses and diseases.

Touchless faucets are worth buying because they are hygienic, germs-free, and water-saving also.

Touchless faucets use infrared sensor technology that allows you to start the flow of water without touching the faucet. Instead, just placing your hand under the spout sensor, the sensor will give the solenoid valve a signal to open, then the water will start flow; When you take your hand away, the sensor will indicate the solenoid valve to close, then water flow will stop.

For more details, please check our blog here.

Normally there will be a button on the control box of the faucet. Press the button, and it resets the touchless faucet setting. Some touchless faucet have the function to reset automatically when the power restart.

There are combined several reasons that your touchless faucet may not work.

1. Battery issue: battery no power or battery installed in the wrong direction.
2. Sensor issue: the sensor got damaged, the surface not clean or the waterproof cable connection issue.
3. Solenoid valve issue: the filter in the valve blocked or the valve is damaged.

For more details, please visit touchless faucet troubleshooting.

There are many reasons that can cause the sensor faucet not working. If you want to know how to fix sensor faucet, please check our blog here.

To install a touchless faucet is simple, you can check the installation manual or check our blog here.