Single Hole Sensor Faucet KEG-8906D/A/AD

The single hole touchless faucet KEG-8906D/A/AD uses active infrared sensor technology that allows you to start the flow of water without touching the faucet. Single hole touchless faucet is also called single hole automatic faucet or single hole sensor faucet.

Single hole touchless faucet is used for single hole basins or sinks. Because of the sideling shape, you don’t need to lean too much. It can be AC powered with a power plug and power adapter or DC battery power, it can also combine both AC and DC power. The touchless faucet can be used in public restrooms and home bathrooms.

  • Brand: KEGE
  • Item No: KEG-8906D/A/AD
  • Easy installation and cleaning
  • Material: Brass
  • Hygienic, bacteria and germs free without touching
  • MOQ: 1 pcs
  • Warranty: one year
  • Cheap price: $40-$55 based on the requirement and quantity

How does the single hole deck mounted touchless faucet work?

The single hole deck mounted touchless faucet has a sensor near the spout that can adjust the sensor distance automatically based on different working conditions.

When people put their hands near the faucet spout, the water starts automatically. When your hands leave, the water stops. Or waiting after the setting minutes, normally 60 seconds and the water stops.

Features:

  • Touchless wave-on sensor: wave the sensor without touch, water flows, wave again, water stops. Water stops automatically after 1min continuously flow.
  • Automatically adjusting the sensing distance.
  • Water-saving: Water-efficient faucet reduces overall water usage without sacrificing water.
  • Energy-saving: 4AA alkaline batteries shall last approximately 3000 times/month for one year.
  • Easy installation and cleaning.
  • Outside connected battery box for a convenient changing between AC,DC and AD.
  • Healthy and Safe: with the touch-free faucet, it can prevent the spread of bacteria and germs. It’s not only time-saving but also hygienic.

Appearance

The single hole touchless faucet KEG-8906-D/A/AD has a chrome surface appearance.

Spare parts

The spare parts include the control box and AC power adapter. In the control box, it has the solenoid valve and DC battery box. With the connector, it connects with the faucet body.

Dimension

Technical specification:

Power supplyMaterialInlet/Outlet diameterTemperature mixerStatic consumptionSensor distanceSensitivityMax. water flowWorking temperatureStorage temperatureResponse timeWater pressure
DC 2.4-3.2V with 2 AA alkaline batteries/
AC110-240V adapter–
Output: 5.0-6.5V/1A (Ripple<60mW)


Brass

G1/2″ 
No/for cold water only, but can install a mixer valve
≦ 40 uA1.Adjustable sensor range: 7-21cm
2. Default distance 10±10%CM
0.512s60s±6s0 ~ 50 ℃-40 ~ 80 ℃Open≤1s, close≤1.5s0.05MPa-0.6MPa

Package

Net weightGross WeightInner packageOuter packageQuantity per carton
2.3KG2.8KG380*170*113mm525*395*360mm9pcs

IR Sensor

Water flows when hands enter the sensor range and water stops when hands leave.

  1. Intelligent sensor technology, touch free and automatic water on/off. Hygienic and convenient. Save more than 65% water.
  2. Water-saving protection: Water stops automatically when water flows the 60s continuously to avoid water wasting.

Low power indicator

LED light on the sensor flashes when battery power is low to indicate battery replacement.

AC/DC power supply. Automatic shut off when no power supply

  1. 110-240V adapter for AC power supply. 2 AAA alkaline batteries for DC power supply. The battery case is integrated into the control box
  2. The valve will be shut off when there is no power supply to avoid water wasting.

Battery replacement

When the indicator light continuously and slowly double flashes alarm, please replace the battery.

  1. Open the battery box cover of the control box and take out the battery box group;
  2. Take out the old battery and replace it with 2 new AAA alkaline batteries;
  3. Check that it is correct, put the battery box back in place, and fasten the battery box cover.
  • Make sure the batteries are installed correctly (positive and negative charge).
  • Do NOT mix new old batteries.
  • Do NOT mix batteries of different brands.

Motion sensor faucet troubleshooting

Problem Possible Reason Suggested Solution
No water flow Batteries run out Replace batteries
Dirt on sensor surface Clean the sensor surface
Main water supply is shut off Turn main water supply on
Dirt on water filter net Clean the water filter net
Water pressure is not applicable Refer to technical specification
Have a continuous water flow problem Batteries run out Replace batteries
Low water pressure Refer to technical specification
Having leakage after turning off the faucet Low water pressure Refer to technical specification
Dirt on water filter net Clean the water filter net

FAQ:

touchless faucet uses active infrared sensor technology that allows you to start the flow of water without touching the faucet. Instead, just place your hand in front of the sensor will start the water flow, and the water will stop when you take your hand away.
If you forget to close the no-touch faucet, no problem, the sensor IC and program will control the water to stop automatically after 3mins continuously flow, time can be set.
More excitingly, the design of most touchless faucets is stylish and elegant to fit all basins,sink or lavatory, from classic to modern.

Yes, the touchless faucet is quite reliable. The technology of the infrared sensor is stable and developed for many years. Every KEGE touchless faucets are tested by life testing, valve on/off testing, infrared sensor distance testing and salt spraying testing. Sensor lifespan:500,000 times on and off, valve lifespan:1,000,000 times opening.

In the future modern smart homes, a touchless bathroom faucet is also one core part. They’re cool, for one thing, as their motion sensors always give you some sort of smart, modern techy feelings. Plus, a touch-free faucet keeps your fixture and bathroom clean, it’s a good hygienic choice and decreases the risk of contracting viruses and diseases.

Touchless faucets use infrared sensor technology that allows you to start the flow of water without touching the faucet. Instead, just placing your hand under the spout sensor, the sensor will give the solenoid valve a signal to open, then the water will start flow; When you take your hand away, the sensor will indicate the solenoid valve to close, then water flow will stop.

The touchless faucet needs electricity for sure. Both the sensor and solenoid valve works need electricity power. Normally three choices: DC 6V: 4xAA alkaline batteries; AC: using a transformer to transfer power from 220V/380V to 6V; Both DC/AC models existed, firstly use AC power to work, if AC no power then DC start to work.

6V with 4xAA alkaline batteries shall last approximately 3000 times/month for one year.

1. Battery issue: battery no power or battery installed in the wrong direction.
2. Sensor issue: the sensor got damaged, surface not clean or the waterproof cable connection issue.
3. Solenoid valve issue: the filter in the valve blocked or the valve is damaged.

For more details, please check touchless faucet troubleshooting.

Related Products:

Contact us:

Tell us which item do you need?
Tell us the power type, DC: 6V or AC: 100V-240V
Tell us more information about your need