kege

TOUCHLESS SOAP DISPENSER WALL MOUNT

Wall mount automatic soap dispenser or wall mounted touchless soap dispenser is installed on the wall next to the sink. It is much easy for people to get soap before wash hands, no need to find the soap dispenser everywhere, it’s just on the wall beside you.

You just need to put the hands under the spout of the dispenser, the soap automatically comes out, and then it stops automatically. No need to touch, no worry about too much soap. Both the dispense time and volume can be adjusted.

The commercial wall mounted touchless soap dispenser offers liquid soap, foam soap, and hand sanitizer without touching, our wall mount sensor soap dispensers are easy to refill. It is ideal for use in offices, schools, warehouses, food service facilities, manufacturing, and hospitals. This product is made to provide long-lasting strength and use. It is also ideal for high-traffic areas such as restrooms, shopping malls, break rooms, lunchrooms, and restaurants.

wall mounted automatic soap dispenser keg-6631

ONE STOP SUPPLIER OF WALL MOUNTED AUTOMATIC SOAP DISPENSER SUPPLIER IN CHINA

KEGE is a leading manufacturer of wall mount automatic soap dispensers in China since 2015. We offer one-stop wholesales service. We have touchless soap dispensers wall mounted, automatic soap dispensers countertop mounted, and free standing touchless soap dispensers. We put many facilities and people in research and develop touchless soap dispensers since the beginning, with years of investment we have infrared sensor technology, SCM intelligent control, waterproof and soap saving technology which can be used for the soap dispenser and keep the electronic soap dispenser stable and efficiency.

If you are looking for the best wall mounted automatic soap dispensers, then KEGE is your best choice. We accept small MOQ and support you with all the technology.

Features:

  • Wall mounted touchless soap dispenser saves space for the basin. Also, wall mounted type can not be removed and broken easily by anyone else.
  • 100% hands free operation – touchless soap dispenser helps reduce cross-contamination. Hygienic, contactless, bacteria, and germs free without touching. Clean your hands effectively.
  • KEGE wall mounted automatic soap dispensers applicable to kinds of washing soap liquid, foam soap, and hand sanitizer. The controlled output of soap volume per drop can be adjusted from 0.8ml to 6.5ml.
  • No Messy Drips.The dispenser features a non-drip spout, eliminating mess and waste.
  • Automatic on/off: The touchlee soap dispenser wall mount type automatically supplies soap as the dispense time set as soon as hands in sensor range. Soap dispenser automatically stops working if hands out of sensor range. High responsive: dispense within 0.5 seconds.
  • Suitable for types of soap, such as hand sanitizer, disinfectant, dish soap,shampoo and detergent.it is easy to refill the automatic soap dispensers.

How automatic soap dispenser wall mounted works?

Technical Specification

Working powerSensor response time Adjustable Sensor distanceSensor lifetimeWarrantySupply volume per drop 
DC6-9V or AC 110-240V<0.5 second5-16cm300,000 times on/offOne YearAdjustable 2-13.5ml, factory setting :2ml

Wall mounted touchless sensor soap dispenser installation guide

Wall mounted automatic soap dispenser KEG-610 installation guide
Wall mounted automatic soap dispenser KEG-6618 installation guide

Advantages of touchless soap dispensers wall mounted

  • Touchless
  • Heath Protection
  • Simple to use
  • Eco-friendly
  • Functions for children
  • Refillable wall mounted, it saves money
Application Wall Mounted Automatic Soap Dispenser KEG-600D

Application:

Stainless steel wall mount touchless soap dispenser:

The stainless steel wall mounted automatic soap dispenser comes with the raw material of stainless steel, it is durable to use and rust-resistant. We have black, white, and polished stainless steel wall mounted sensor soap dispensers. It has a transparent window which you can see the soap volume clearly from the outside, you can also refill soap if it doesn’t have too much volume.

The stainless steel automatic soap dispenser fits for outside public restrooms using. You can put it in a wet and humid place like public restrooms, without worry about rust.

Black stainless steel wall mounted touchless soap dispenser keg-610

+86 158 5847 1917
315th,Tongning road,Hongtang industrial C area, Jiangbei, Ningbo,China,315033
sales@tap-sensor.com

WHY IS HAND WASHING SO IMPORTANT DURING THE PANDEMIC?

During the Coronavirus Disease 19 (COVID-19) pandemic, keeping hands clean is especially important to help prevent the virus from spreading.

Regular handwashing is one of the best ways to remove germs, avoid getting sick, and prevent the spread of germs to others. Whether you are at home, at work, traveling, or out in the community, shopping malls, airports, and so on, find out how handwashing with soap and water can protect you and your family. Using our touchless faucets and soap dispensers can help you wash hands efficiently, healthy, and hygienic.

For more, please view our blog WHY IS HAND WASHING SO IMPORTANT.

wash hands with liquid soap

How to install wall mounted automatic soap dispenser?

It is quite easy to install a touchless soap dispenser. Please check below steps:

  1. Select the position where you would like to mount the automatic soap dispenser, at least 25cm above the basin countertop.
  2. Drill two holes, the distance between the holes should be 36mm and the diameter 6mm with parallel or follow the instruction.
  3. Put into the stopper.
  4. Use the screw to fix the fixed plate.

INSTALLATION STEPS to CHECK

  • Check to ensure that the dispenser is firmly attached to the mounting surface.
  • Check to ensure that correct viscosity soap is filled into the reservoir.
  • Check to ensure that soap container cover is closed and the air vent hole is not blocked.
  • Check to ensure that the soap container is clean (no spill-over) and not leaking.
  • Check to ensure that the battery box plug is properly engaged with the cable and the compartment door is closed.
  • Check to ensure the LED flashes
  • Check to ensure that the plastic nozzle cap was removed before operating dispenser.

Automatic Soap Dispensers Troubleshooting

Problem Solution
No soap dispensed on handsCheck soap qualities, properties, and levels in the reservoir.
Check sensor cover to clean dirt on the sensor surface.
Check the battery charge level.
Check spout nozzle, cap air hole, and pump tube for clogs. Check for reflected sensor signals jamming detector.
Battery LED indicator no flashReplace batteries
Low volume soap dispensedRemove soap container and wash out spout nozzle, cap air hole, and pump tube and replace with fresh new soap.
Check if the cradle gate is not properly latched
Check if pump tube is loose in cradle or cross-threaded
Soap leaks at the bottom of
housing
Check if pump tube cross-threaded onto the bottom of reservoir or reservoir is damaged/punctured
Check disposable soap cartridge for defects and replace

Related products:

Related articles:

FAQ:

An automatic soap dispenser uses passive infrared sensor (PIR) technology that when placing your hand in front of the sensor will start the soap drip, and it will stop supplying after hands leave.

Passive infrared sensors detect the infrared radiation emitted by objects in their field of detection. This technology is used to detect the movement of objects or people within a given volume, such as a room for example.

For more details, please visit our blog WHAT IS AUTOMATIC SOAP DISPENSER AND HOW DOES IT WORK .

An automatic hand wash dispenser always helps add to the style quotient of any bathroom space. The design is always sleek and minimalistic, and it can also be used for more than just liquid soap. An automatic soap dispenser can also be used to store and dispense hand sanitizer, hand cream or body lotion.

What’s more, an automatic soap dispenser helps reduce cross-contamination. It is hygienic, bacteria, and germs free without touching. Automatic soap dispensers reduce waste. Touchless soap dispensing technology allows the user a limited amount of the product. So they are more economical.

Here are 5 steps to hand-washing so that your hands are really clean.

  1. Wet your hands with clean, running water.
  2. Put your hands in front of the automatic soap dispenser and get some soap without touching.
  3. Scrub your hands for at least 20 seconds. That means the back of your hands, between your fingers, and don’t forget your thumbs!
  4. Rinse your hands well under clean, running water.
  5. Dry your hands using a clean towel or air dry them.

Very suitable, You can put the soap dispenser to anywhere you wanted.

I have one that is 1 year old and another that is about 2 years old. Both are working great and I’ve only replaced the batteries in the 2-yr-old. I have noticed that if you don’t use them regularly, they will get slow or not pump soap at all. But if you keep activating and especially set it to pump out the most soap, it will eventually start working again. In one case after a period of no use (we were on vacation for 2 weeks), I turned it on it’s side to let the intake in the bottom drain some and that seemed to help get it going again.