Auto Toilet Flusher Valve KEG-3300D Specification
|External Power Supply||Applicable water pressure||Applicable Water Temperature||Ambient Temperature||Feedwater caliber||Flushing water volume|
|AC:110v-240V,50Hz-60Hz||DC&AC combined||0.3-0.8Mpa||0.1-60℃||0.1-45℃||G1”||4-6L(10s based on water pressure of 0.3-0.6Mpa)|
ACTIVE INFRARED SENSOR TECHNOLOGY
As the most important part, the work of the sensor is to forward the signals to the valve to turn on the toilet flusher after detecting your body. Its job is to inform the valve when to turn on or off the water when your body comes and leaves. The cover of the sensor is made of plastic ABS or PA and there is an electronic circuit board inside the sensor eye which also includes the led light.
The sensor range for automatic toilet flushers is 400mm-800mm. We can adjust the sensor range and flushing time with a remote controller.
How to install automatic toilet flush?
Touchless Toilet Flusher Troubleshooting
|Problem||Possible Reason||Suggested Solution|
|No water flow||Batteries run out||Replace batteries|
|Dirt on sensor surface||Clean the sensor surface|
|Main water supply is shut off||Turn main water supply on|
|Dirt on water filter net||Clean the water filter net|
|Water pressure is not applicable||Refer to technical specification|
|Have a continuous water flow problem||Batteries run out||Replace batteries|
|Low water pressure||Refer to technical specification|