Automatic Toilet Flusher with manual button KEG-GB-8300ADM

    • The automatic toilet flusher KEG-GB-8300ADM with a manual button on the panel. It detects the movement of people and flushes automatically after leaving. It has normal mode flush and water saving mode flush. When the sensor is not working like no battery power, you can also press the manual button to flush.

    Require for sample
    Contact us

    Features:

    • Flush program: Single-chip microcomputer control, normal Mode flush time 9s; Water saving Mode: usage time less than 1min: 4s/flush while using time more than 1min: 9s/flush.
    • Automatically flush if toilets no usage in 24 hours.
    • Low power indication: This may indicate it is time to replace existing batteries with new ones or there is not enough power going to the unit.
    • Water-saving: Water-efficient toilet flusher valve reduces overall water usage without sacrificing water.
    • Energy-saving: 4AA alkaline batteries shall last approximately 3000 times/month for 1.5 to 2 years.
    • All stainless steel embedded box, copper cast nickel plated solenoid valve is adopted, with water regulation and filter protection device built in.
    • Healthy and Safe: Touch free, it can prevent the spread of bacteria and germs, convenience and hygiene.
    • All copper cast nickel plated solenoid valve is adopted, with water regulation and filter protection device built in.
    • Waterproof connector, with waterproof grade up to IP × 67.

    AUTOMATIC TOILET FLUSHER GENERAL INFORMATION
    Model No. Type Material NW./GW. Warranty Inner package Outer package  Quantity per carton
    KEG-GB-8300ADM  Automatic Toilet Flush 304 S/S brush 2.7/3.1KG One Year 378*165*112mm  520*390*475mm  12pcs
    Automatic Toilet Flusher KEG-GB-8300ADM installation for crouching and seating

    AUTOMATIC TOILET FLUSHER TECHNICAL SPECIFICATION
    Working power Average static power consumption Instant dynamic power consumption Working water pressure  Sensor distance  Error detection time Environment temperature  Medium temperature Inlet/Outlet diameter
    DC6V & AC220V <50uA <2.5W 0.2-0.7MPa 67±5cm to white board (about 50cm to body) <3 second 1~40℃ 0~65℃ G1″
    Automatic Toilet Flush 8300adm control box
    Automatic Toilet Flush 8300adm battery box
    Automatic Toilet Flush 8300adm adapter

    How to install automatic toilet flush?

    Please check the below video to install the automatic toilet flushers.

    Play

    Touchless Toilet Flusher Troubleshooting
    Problem Possible Reason Suggested Solution
    No water flow Batteries run out Replace batteries
    Dirt on sensor surface Clean the sensor surface
    Main water supply is shut off Turn main water supply on
    Dirt on water filter net Clean the water filter net
    Water pressure is not applicable Refer to technical specification
    Have a continuous water flow problem Batteries run out Replace batteries
    Low water pressure Refer to technical specification
    Automatic Toilet Flusher For Home

    Want to get automatic toilet flushers?

    hygienic, bacteria, and germs free without touching, reduce COVID-19 spreading.

    People who are asking more:

    Automatic toilet flusher uses infrared sensor technology that will flush automatically after leaving, the sensor detects and gives a pulse signal to the solenoid valve, when you leave, flush automatically. Microchip controls all the processes.

    Auto toilet flushers need electricity for sure. Both the sensor and solenoid valve works need electricity power.
    Normally three choices:
    DC: 4xAA alkaline 6V batteries;
    AC: use a transformer to transfer power from 220V/380V to 6V;
    DC/AC： Both DC/AC models existed, firstly use AC power to work, if AC no power then DC start to work.

    6V with 4xAA alkaline batteries shall last approximately 3000 times/month for 1.5 to 2 years.

    Normally there is a manual button on top of the cistern. If the automatic flush and remote control functions fail, you can active the manual button.

    Related products: